| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
jimb0_d
GyrO-Expérimenté / Experienced
Inscrit le: 10 Jan 2006
Messages: 84
Localisation: Northern Ireland (UK)
 | 2 |
|
 Posté le: Dim Déc 31, 2006 5:21 pm Sujet du message: Powerballs must h8 me... |
 |
|
Ok now i am getting annoyed. In the last coupleof days my powerball (sig series) has messed up and will no longer go above 11.5 k and ive only had it about a month.
This is exactly the same as my two previous neon pros and at roughly about the same timescale although they were used more frequently. I have opend them up and the only thing i can see slightly wrong is possibly the support ring. Between the rotor axl and the support band (on the side without the counter weight) there is a tiny gap developed. The same thing i noticed on my neons but it was a much larger gap on them and inside all of them i found what looked like shearings of plastic as if the band had been grinded off the axl.
Anyway to the point of the post, is this problem normal? should i apply for replacement parts? and is it becasue of how im using my powerball?
Thanks,
James
_________________
Personal Records:
RPM: 14102(R) 13194(L)
30s : 6142(R) 5873(L)
60s : 9215(R) 8928(L)
90s : 14532(R) 14150(L) 16908(using both) |
|
| Revenir en haut |
|
 |
Publicités
|
| Posté le: Dim Déc 31, 2006 5:21 pm Sujet du message: Powerballs must h8 me... |
|
|
|
|
|
| Revenir en haut |
|
|
Obiw4n
Site Admin
Inscrit le: 21 Juin 2005
Messages: 4418
Localisation: Strasbourg // // Metal Speed : 12347 rpm Playmobil Speed: 14147 rpm Metal User
| 31 |
|
| Posté le: Dim Déc 31, 2006 5:24 pm Sujet du message: |
|
|
The Signature has nothing different than the Neons Powerballs...so no wonder your signature is almost dead now...
Check if the rotor's axle has tolerance... and maybe ask for a wnew rotor....
_________________
Help Gyrotek when you buy your Powerballs, use our banner: International, France, Thanks!! |
|
| Revenir en haut |
|
|
Installed
GyrO-Pro
Inscrit le: 02 Aoû 2006
Messages: 428
Localisation: USA
| 9 |
|
| Posté le: Dim Déc 31, 2006 8:29 pm Sujet du message: |
|
|
My neon rotors have always crapped out for one reason or another. I finally gave up and just got all 250hz rotors. 
_________________
15yr. old on my way to the top! |
|
| Revenir en haut |
|
|
jimb0_d
GyrO-Expérimenté / Experienced
Inscrit le: 10 Jan 2006
Messages: 84
Localisation: Northern Ireland (UK)
| 2 |
|
| Posté le: Lun Jan 01, 2007 6:31 pm Sujet du message: |
|
|
| Obiw4n a écrit: | | Check if the rotor's axle has tolerance... |
What do you mean by that?
_________________
Personal Records:
RPM: 14102(R) 13194(L)
30s : 6142(R) 5873(L)
60s : 9215(R) 8928(L)
90s : 14532(R) 14150(L) 16908(using both) |
|
| Revenir en haut |
|
|
Obiw4n
Site Admin
Inscrit le: 21 Juin 2005
Messages: 4418
Localisation: Strasbourg // // Metal Speed : 12347 rpm Playmobil Speed: 14147 rpm Metal User
| 31 |
|
| Posté le: Lun Jan 01, 2007 9:34 pm Sujet du message: |
|
|
I mean the axle has not to be loose inside the rotor.
_________________
Help Gyrotek when you buy your Powerballs, use our banner: International, France, Thanks!! |
|
| Revenir en haut |
|
|
Tstering
GyrO-Savant/ Wise Man
Inscrit le: 18 Oct 2006
Messages: 182
| 25 |
|
| Posté le: Mar Jan 02, 2007 11:48 am Sujet du message: |
|
|
| My neon also went a wrong after a month or so. Still havn't got round to trying to fix it. |
|
| Revenir en haut |
|
|
James M
GyrO-Savant/ Wise Man
Inscrit le: 03 Oct 2005
Messages: 175
Localisation: UK
|
| Posté le: Mar Mar 06, 2007 12:26 am Sujet du message: |
|
|
It will be the rotor, tbh PB's are of pretty poor construction, they're great little things but break even with proper use.
_________________
250hz
RH 13655
LH 13074
90s 16108
30s 5784
350hz
RH 11745 |
|
| Revenir en haut |
|
|
|
